To know who had made a call to you when your mobile was switched off in Mero mobile....

http://www.spicenepal.com/en/missed_call.php Go to this page....

Instructions to use Prbt(Personal Ring Back Tone) feature in Mero Mobile

To activate PRBT in your Sim card....
First Method:- Send sms typing A to 900227
Second Method:- Dial *900# and follow the features
To use Prbt and change tones:-
First Method:- Dial 9208 and follow the features
Second Method: Go to http://www.spicenepal.com/en/prbt.php

Easiest way to activate and use internet settings in Mero Mobile(Nepal)

To Activate your Internet / GPRS In your mero mobile sim:-
(i) Send a message typing A to 900224
                     Or
(ii) Dial *900* And then follow the steps....

To Use Internet/Gprs settings in your Mobile:-
(i) For Nokia / Sony Ericssion / Samsung / LG / Philips and other well known Mobile sets..
          Send a message typin All To 9595
(ii) For Iphone, you could just type Mero in access point in Settings-general-Network-....
(iii) For chinese sets Please contact me :-Cfrommyside@yahoo.com

earn through Internet for Nepali Users...

This is my link to Make you all nepalese citizens easy to access and join
through internet to Make some extra income. It's easy and great idea
to earn through Internet.
http://netearning4nepal.blogspot.com

Mero Mobile Unlimited Internet

I may be the only one in the whole internet sites to provide you ideas to Connect Mero mobile unlimited internet... I saw many blogs asking for mero mobile unlimited internet. I can't be members in all blog and describe so i just published it in my own blog.. Mero mobile has a facility that after downloads reached 50mb your balance deduction get lowered down by half... Reallising this fact I've runned full unlimited internet... You must have balance equals to Rs1000 and must spend you 800 on browsing internet... Then you go out easily to access internet for that same month for free. Rs800 charge for one month unlimited internet...

Remove Usb Virus

How to remove Virus from USB Drives One of the ways by which a virus can infect your PC is through USB/Pen drives. Common viruses such as ’Ravmon’ , ‘New Folder.exe’ etc are spreading through USB drives. Most anti virus programs are unable to detect them and even if they do, in most cases they are unable to delete the file, only quarantine it. Here are the things which you can do if you want to remove such viruses from your USB Drive.

Whenever you plug a Pen drive in your system, a window will appear similar to the one shown below

Don’t click on Ok , just choose ‘Cancel’. Open the Command Prompt by typing ‘cmd‘ in the run box. In the command prompt type the drive letter: and press enter . Now type dir /w/a and press enter.

This will display a list of the files in the pen drive. Check whether the following files are there or not

* Autorun.inf

* Ravmon.exe

* New Folder.exe

* or any other exe file which may be suspicious.

If any of the above files are there, then probably the USB drive is infected. In command prompt type attrib -r -a -s -h *.* and press enter. This will remove the Read Only, Archive, System and hidden file attribute from all the files. Now just delete the files using the command del filename. example del Ravmon.exe. Delete all the files that are suspicious. To be on a safer side, just scan the USB drive with an anti virus program to check whether it is free of virus or not. Now remove the drive and plug it again. In most of the cases, the real culprit turns out to be the “Autorun.inf” file which mostly gets executed when someone clicks Ok in the dialog window which appears above. Thus the infections can spread.

After this..go to *:\WINDOWS\Prefetch folder..there find *.ps files(* may be autorun or New folder.exe etc) if any..if present delete them.

And imp is disable autoplay feature of USB drives , u can use tweak ui s/w for that.If you disable the Autoplay feature of USB drives, then there are lesser chances of the virus spreading

Show your favorite name in windows taskbar

In windows XP, You can display your name or any other favorite word in

windows taskbar just beside the digital time area and you can surprise

your friends to show them your name in windows taskbar.

Follow the given steps to display the name in windows task bar:

To use this feature, you will need to be logged into your computer with

administrative rights.

First click on windows Start button then Settings. Then click on Control

Panel option.

Start>Settings>Control Panel

SELECT ... Regional and language options.

Regional options tab>Customise>Time

As Example. I will use my Username .. RealInfo

Time Format: Must be set to ... h:mm:ss tt

Time Separator: :

Type a name for the time symbols....

AM Symbol: RealInfo

PM Symbol: RealInfo

Click Apply, and Apply again, to back out of all options.

Look by the Time/Clock, and see the name appear.

NOkia secret top codes(Source:http://downloads-all4u.blogspot.com)

Code Description :

These Nokia codes will Work on most Nokia Mobile Phones

(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced by approx. 5%

(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )

(3) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

(4) *#4720# Deactivate Half Rate Codec.

5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )

(6) *#9999# Phones software version if *#0000# does not work.

(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )

( #pw+1234567890+ 1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(9) #pw+1234567890+ 2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(10) #pw+1234567890+ 3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(11) #pw+1234567890+ 4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(12) *#147# (vodafone) this lets you know who called you last.

(13) *#1471# Last call (Only vodofone).

(14) *#21# Allows you to check the number that "All Calls" are diverted to

(15) *#2640# Displays security code in use.

(16) *#30# Lets you see the private number.

(17) *#43# Allows you to check the "Call Waiting" status of your phone.

(1 *#61# Allows you to check the number that "On No Reply" calls are diverted to.

(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.

(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.

(21) *#67705646# Removes operator logo on 3310 & 3330.

(22) *#73# Reset phone timers and game scores.

(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

24) *#7760# Manufactures code.

(25) *#7780# Restore factory settings.

26) *#8110# Software version for the nokia 8110.

(27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair

(0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. (Favourite )

(2 *#94870345123456789 # Deactivate the PWM-Mem.

(29) **21*number# Turn on "All Calls" diverting to the phone number entered.

(30) **61*number# Turn on "No Reply" diverting to the phone number entered.

(31) **67*number# Turn on "On Busy" diverting to the phone number entered.

(32) 12345 This is the default security code.

NOkia secret top codes(Source:http://downloads-all4u.blogspot.com)

Code Description :

These Nokia codes will Work on most Nokia Mobile Phones

(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced by approx. 5%

(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )

(3) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

(4) *#4720# Deactivate Half Rate Codec.

5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )

(6) *#9999# Phones software version if *#0000# does not work.

(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )

( #pw+1234567890+ 1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(9) #pw+1234567890+ 2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(10) #pw+1234567890+ 3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(11) #pw+1234567890+ 4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

(12) *#147# (vodafone) this lets you know who called you last.

(13) *#1471# Last call (Only vodofone).

(14) *#21# Allows you to check the number that "All Calls" are diverted to

(15) *#2640# Displays security code in use.

(16) *#30# Lets you see the private number.

(17) *#43# Allows you to check the "Call Waiting" status of your phone.

(1 *#61# Allows you to check the number that "On No Reply" calls are diverted to.

(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.

(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.

(21) *#67705646# Removes operator logo on 3310 & 3330.

(22) *#73# Reset phone timers and game scores.

(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

24) *#7760# Manufactures code.

(25) *#7780# Restore factory settings.

26) *#8110# Software version for the nokia 8110.

(27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair

(0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. (Favourite )

(2 *#94870345123456789 # Deactivate the PWM-Mem.

(29) **21*number# Turn on "All Calls" diverting to the phone number entered.

(30) **61*number# Turn on "No Reply" diverting to the phone number entered.

(31) **67*number# Turn on "On Busy" diverting to the phone number entered.

(32) 12345 This is the default security code.

Plz Stop using Ctrl+C if you are using net....

mp For those who r using IE more.........

Ctrl+C may be the most important work we do everyday. But it's not a very safe thing to do. Read on to know why. What happens when you press Ctrl+C while you are online. We do copy various data by Ctrl + C for pasting elsewhere. This copied data is stored in clipboard and is accessible from the net by a combination of Javascripts and ASP. This is called clipboard hack problem.

Just try this:

1.Copy any text by Ctrl + C
2.Click the Link http://www.sourcecodesworld.com/special/clipboard.asp
3.You will see the text you copied was accessed by this web page.

Surprised! I know you are because i was also surprised to see it. Do not keep sensitive data (like passwords, credit card numbers, PIN etc.) in the clipboard while surfing the web. It is extremely easy to extract the text stored in the clipboard to steal your sensitive information. Forward this information to as many friends as you can, to save them from online frauds!

It is true, text you last copied for pasting (copy & paste) can be stolen when you visit web sites using a combination of JavaScript and ASP (or PHP, or CGI) to write your possible sensitive data to a database on another server.

How Cipboard Hack is done?

The Clipboard hack is done by the following Source Code:




How to safeguard yourself from Clipboard Hack Problem?

To avoid clipboard hack problem, do the following:

1.Go to internet options->security.
2.Press custom level.
3.In the security settings, select disable under Allow paste operations via script.

Now the contents of your clipboard are safe.

Interestingly, this hack works only on internet explorer, and not on Mozilla Firefox browser.

And as a matter of safety regularly clear your cache which contains the data that you provide to various sites....

This feature of Browsers is more dangerous than Clipboard data. Clipboard data will live until you restart/log off the machine but the cache data will exist until you clear it explicitly.

To clear cache, go to Internet Explorer (IE) Options --> Click General Tab --> Under Browsing History section click Delete buttion.

For Mozilla, Tools --> Click Clear private data

This operation clears the temporary files, History of web pages we have visited (which are used by spyware applications) , Cookies (our personal info that is used to authenticate against a website), saved passwords and Web form information (will contain the data that you enter in web pages, it can be your personal data, cell phone no, credit card a/c no. etc).